Konica Minolta bizhub 222 - Manual (Page 125)

6 Useful transmission functions
6-26 362/350/282/250/222/200
Usef
ul tr
an
sm
ission
fu
nctio
n
s
Chap
te
r 6
Bulletin boards
Bulletin boards can be set up using F-codes to provide documents to any
number of people.
By specifying an F-code programmed for each bulletin board, documents on
the bulletin board can freely be retrieved by callers.
!
Detail
For details on setting up a bulletin board, refer to “Setting up a bulletin
board” on page 9-27.
For details on putting a document on a bulletin board, refer to “Register-
ing a document on a bulletin board” on page 6-30.
For details on retrieving documents registered on a bulletin board, refer
to “Retrieving documents from bulletin boards (“Retrieve” function)” on
page 7-3.
Remote copying
The sender can specify the number of fax copies to be printed by the recip-
ient’s fax machine.
To perform remote copy operations
Specify the F-code (SUB) as shown below.
Precautions for specifying F-codes
When this machine receives an F-code, it first searches the F-codes for the
bulletin boards (1 through 10). If there are no matching F-codes, it searches
those for the confidential boxes (1 through 10).
When specifying an F-code, we recommend managing the numbers, such as
by classifying them according to their function (for example, for confidential
boxes or bulletin boards).
02 05
Specifies the number of copies printed
by the recipient’s fax machine.
Function code: “02” for a remote copy
operation.