Konica Minolta bizhub 222 - Manual (Page 18)

Introduction
362/350/282/250/222/200 x-17
Getting Started
Sending a fax
The basic procedure for sending a fax is described below.
In order to use the Fax functions, the optional fax kit must be installed.
1
Press the [Fax/Scan] key in the control panel to enter Fax mode.
– If the machine is set to display the FAX/Copy screen when it is in
standby, a fax can be sent simply by specifying the recipient’s fax
number or by entering “#” and a one-touch number. For details, re-
fer to “Default Screen” on page 10-11.
2
Position the document to be faxed.
– For details on positioning the document, refer to “Feeding the doc-
ument” on page 2-4.
3
Specify the desired set-
tings.
Quality & Reduction screen
FAX Menu screen