Konica Minolta bizhub 222 - Manual (Page 200)

Utility mode 10
362/350/282/250/222/200 10-17
Utility mode
Chapter 10
10.6 Available parameters
The following Administrator Management parameters are related to the infor-
mation in this manual.
Administrator Management 1 screen
Parameter Description
Initial Setting Language for Communica-
tion Select the language used to display the fax
number and the sender’s name printed at
the edge of the sent fax.
Self-telephone # Informa-
tion 1 & 2 Register the information required for a fax
transmission, such as the machine’s tele-
phone number, whether or not a private
branch exchange is used, and the dialing
system.
TSI Registration Register this machine’s name, which is
printed at the edge of the sent fax. Since a
maximum of 8 characters can be entered,
specify a name that will be understood by
the recipient.
Self-ID Type in the text that appears in the recipi-
ent’s reports and machine control panel.
This allows the receiver to easily check that
the fax was sent from this machine.
Admin. Set Restrict One-Touch Editing Select whether or not one-touch dial but-
tons can be registered or changed from the
User Setting screen. Use the “One-Touch”
parameter, which is the same as that in the
Administrator Management screen, to reg-
ister one-touch dial buttons.
Activity Report E-Mail TX Type in the e-mail address of the computer.
The CSV file of the activity report is sent to
the specified e-mail address.
FAX Regist. Use to register one-touch dial buttons if
they cannot be registered or changed from
the User Setting screen.
TX Settings Specify the default transmission settings.
RX Settings Specify the time and day for printing a fax
that is received.
FAX Setting Specify the settings for the fax line that is
used.
Print Lists Print lists of the machine settings.
Report Settings Specify the conditions for printing result re-
ports and transmission activity reports.
Document Management Specify how sent and received documents
are processed and transferred.