Konica Minolta bizhub 222 - Manual (Page 264)

Utility mode 10
362/350/282/250/222/200 10-81
Utility mode
Chapter 10
Specifying settings to limit dialing and broadcast transmissions (mode
018)
Specify whether or not broadcast transmissions and dialing to specify desti-
nations are limited.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
*1 Prohibited when bit 6 of software switch setting mode 477 is set so that
the settings can only be specified in Administrator mode
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 1 (HEX: 01)
Bit Description Setting Description Page Refer-
ence
7, 6, 5, 4 ----------------------- 0000 *Do not change these bits
when specifying settings
for this function. ----------
3 Specifies whether or
not dialing to specify
a destination is pro-
hibited. *1 0 Permitted ----------
1 Prohibited
2 Specifies whether or
not broadcast trans-
missions are prohib-
ited. 0 Permitted ----------
1 Prohibited
1, 0 ----------------------- 01 *Do not change these bits
when specifying settings
for this function. ----------