Konica Minolta bizhub 222 - Manual (Page 283)

10 Utility mode
10-100 362/350/282/250/222/200
Utility mode
Chapter 10
Specifying settings for limiting user authentication to only Scan func-
tions (mode 479)
Specify whether or not user authentication is performed only when the [Fax/
Scan] or [Extra Scan] key is pressed.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
2
Reminder
Do not specify settings for mode 479 other than those described in
“Specifying the setting”.
!
Detail
If user authentication is limited to Scan functions, touch [Account/User
Auth.] in the Administrator Management 1 screen, and then select “Exter-
nal Server” as the user authentication method. For details on the external
server authentication settings, refer to the User’s Guide [Copy Opera-
tions].
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX: 00)
Bit Description Setting Description Page Refer-
ence
7, 6, 5 ---------------------- 000 *Do not change these bits
when specifying settings
for this function. ----------
4, 3, 2, 1, 0 Specifies whether or
not to limit authenti-
cation on Fax and
Scan functions. 11001 Limited ----------
00000 Not limited ----------