Konica Minolta bizhub 222 - Manual (Page 63)

2 Transmission
2-20 362/350/282/250/222/200
T
ran
sm
iss
ion
Chapter 2
5
Press the [Start] key.
Scanning of the document begins, and then the fax is sent.
If multiple recipients were selected, the Dest. tab of the Check Job De-
tails screen appears so that the selected destinations can be checked.
For details, refer to “Specifying multiple recipients (broadcast trans-
mission)” on page 2-24.
2
Note
To stop the transmission, press the [Stop] key. For details, refer to “Stop-
ping the transmission” on page 2-36.
If software switch settings were specified to prevent broadcast transmis-
sions, a fax cannot be sent to multiple recipients. For details on the soft-
ware switch settings, refer to “Specifying software switch settings
(machine functions)” on page 10-67.
Using a program
If a program has been registered, the recipient’s fax number can be dialed
simply by pressing the program button.
If transmission settings (such as the document type and 2in1 transmission)
have been registered with a program button, the fax can be sent simply by
pressing the program button, without having to specify the settings each
time. In addition, the fax can be sent to multiple recipients if they are all reg-
istered in the fax program, or it can be sent at a specific time if the transmis-
sion time is specified.
1
Press the [Fax/Scan] key to display the Fax mode screen.
– The recipient and transmission settings must have been registered
with a program button in advance. For details, refer to “Registering
a transmission program” on page 9-18.
– If desired, touch [Quality & Reduction] or [FAX Menu], and then
specify the desired settings. For details on the settings available on
the Quality & Reduction screen, refer to “Specifying the transmis-
sion settings” on page 2-9. For details on the settings available on
the FAX Menu screen, refer to “Useful transmission functions” on
page 6-2.
2
Load the document.