Konica Minolta bizhub 222 - Manual (Page 69)

2 Transmission
2-26 362/350/282/250/222/200
T
ran
sm
iss
ion
Chapter 2
6
Check the selected des-
tinations, and then press
the [Start] key.
– Using the software
switch settings, you
can specify whether
or not a screen ask-
ing for confirmation
of the settings is dis-
played before a
broadcast transmis-
sion. For details, re-
fer to “Specifying software switch settings (machine functions)” on
page 10-67.
Scanning of the document begins, and then the fax is sent.
2
Note
A report can be viewed to check whether or not the fax was sent to all
recipients. Refer to “Specifying report output settings (Report Settings)”
on page 10-48.
If software switch settings were specified to limit dialing, a fax cannot be
sent by directly typing in the fax number. For details on the software
switch settings, refer to “Specifying software switch settings (machine
functions)” on page 10-67.
If software switch settings were specified to prevent broadcast transmis-
sions, a fax cannot be sent to multiple recipients. For details on the soft-
ware switch settings, refer to “Specifying software switch settings
(machine functions)” on page 10-67.
Checking/deleting recipients
The selected recipients can be checked or deleted.
1
Press the [Fax/Scan] key to display the Fax mode screen.
2
Specify a transmission recipient, and then specify settings on the Qual-
ity & Reduction and FAX Menu screens.
3
Press the [Mode Check] key.