Konica Minolta bizhub 222 - Manual (Page 97)

4 Troubleshooting
4-6 362/350/282/250/222/200
Tr
ou
b
les
ho
ot
ing
Chapter 4
4.3 Error messages
If a machine malfunction occurs, the error screen appears with one of the fol-
lowing error messages. Refer to the following table, and then perform the in-
dicated operation.
If correct transmission are still not possible, even after performing the de-
scribed operations, contact your technical representative.
!
Detail
For details on troubleshooting procedures for document misfeeds, paper
misfeeds, poor print quality, or empty toner, refer to the User’s Guide
[Copy Operations].
If any message other than those listed above appears, perform the operation
described in the message.
Error message Cause Remedy
Original size cannot be detect-
ed. The paper size of the document
cannot be detected. Select the paper size of
the document.
This mode cannot be set with
XXX. Functions that cannot be used
together are selected. Make copies using only
one of the functions.
The job has been deleted. Not
enough remaining memory. The memory is full. If documents stored in the
memory are waiting to be
printed, print them.
Malfunction detected. Please
call your Technical Representa-
tive. Some malfunction occurred in
the machine. Inform your technical rep-
resentative of the code
displayed on the touch
panel.