Konica Minolta bizhub 420 - Manual (Page 170)

Setting Up the PCL Driver 5
IC-204 5-38
6
Check the information, and then click the [OK].
7
From the “Resolution” drop-down list, select the desired setting.
8
Click the [Details].
The [Fax Mode Details] dialog box appears.
9
To print a file after a fax is sent, select the “Print Recipient File” check
box.
10
To set the time when the fax is to be sent, select the “Timer Send”
check box, and then specify the time that you want the fax to be sent
in the “Send Time” boxes.
– By clicking the [Reflect Current Time], the current time set on the
computer is displayed in the “Send Time” boxes.
– When using “Timer Send”, check that the time set on the computer
is synchronized with the time on this machine. If the transmission
time is earlier than the current time of this machine, the fax is sent
the next day.