Konica Minolta bizhub 420 User Manual

Page 92

Advertising
background image

Setting Up Network Printing

3

IC-204

3-21

5

In Administrator mode of PageScope Web Connection, select “Net-
Ware Setting” from the Network tab, and then specify the following set-
tings.

IPX Setting: Select “ON”.
Ethernet Frame Type: Select “Auto Detect”. (Select the frame type ac-
cording to the network environment.)
NetWare Print Mode: Select “Nprinter/Rprinter”.
Print Server Name: Specify the print server name created in step 4.
Printer Number: Specify the printer number (0-255). When 255 is spec-
ified, the setting is “Auto Detect”.

6

Restart this machine (turn the main power off, then on again).

When turning the power off, then on again, be sure to turn the sub-
power switch off first, then the main power switch. In addition, wait
at least 10 seconds before turning the power on again; otherwise,
this machine may not function properly.

7

Use the NetWare server console to load PSERVER.NLM.

8

Use the NetWare server console to display the print server screen, and
then check that “bizhub 500/420/360” (created printer) is shown as
“Waiting for Job” for the connected printer (0).

Advertising
This manual is related to the following products: