Konica Minolta bizhub 420 User Manual
Page 74
Setting Up Network Printing
3
IC-204
3-3
With Macintosh
You can print from your Macintosh computer using AppleTalk or Bonjour/
Rendezvous.
You can connect this printing system to print server in an AppleTalk, a Bon-
jour/Rendezvous environment and send print jobs from the Macintosh com-
puter to this machine.
Network Connection Methods That Can Be Selected in Each Windows
Operating System
This chapter describes the settings that must be specified for network print-
ing.
Setting procedures differ depending on the method of networking printing
used (SMB, Raw, LPR, or IPP printing). Select the best method of network
printing for your Windows environment.
Network Printing from a Windows Operating System
*1
When conducting the Raw printing with Windows 98SE/Me, an applica-
tion referred to as [Peer to Peer Tool] may be necessary. For more de-
tails, contact your service representative.
2
Reminder
Before setting up network printing, install the printer driver. For details on
installing the printer driver, refer to “Installing the Printer Driver” on
page 2-1.
To perform network printing, change the printer port for the installed
printer driver to one for a network connection, and then change the set-
tings on this machine as necessary. For an IPP connection, it is neces-
sary to install the printer driver first.
Proto-
col Used
98SE
Me
NT
4.0
2000
XP
Serv-
er
2003
XP
x64
Serv-
er
2003
x64
SMB Print-
ing
TCP/IP,
NetBEUI
o
o
o
o
o
o
o
o
Raw print-
ing
TCP/IP
*1
*1
o
o
o
o
o
LPR Printing
TCP/IP
o
o
o
o
o
o
IPP Printing
TCP/IP
o
o
o
o
o