Konica Minolta bizhub 420 - Manual (Page 255)

Setting Up the PPD Driver (Mac OS 9) 8
IC-204 8-10
Finishing Options
You can specify printer-specific options. You can specify this option when
using the staple or hole punch functions of this machine.
1
From the “File” menu, select “Print”.
2
Select “Finishing Options 1 to 3”.
3
Specify settings for the following:
Offset Specifies offset.
Output Tray Selects the output tray.
Binding Position Selects the binding position.
Duplex Performs duplex printing.
Combination Selects booklet printing.
Staple Performs stapling.
Punch Performs hole punching.
Fold & Staple Executes the Fold & Staple.
Front Cover Page Attaches a front cover page.
Paper Tray (Front Cover Page) Selects the input tray for the front cover.
Back Cover Page Attaches a back cover page.
Paper Tray (Back Cover Page) Selects the input tray for the back cover.
Transparency Interleave Inserts interleaves between overhead projector
transparencies.
Paper Tray (Transparency Interleave) Selects the input tray for the transparency inter-
leaves.
Wait Mode Stops printing temporarily after part of the docu-
ment has been printed so that the proof print can
be checked.
Resolution Specifies the print resolution.