Konica Minolta bizhub 420 - Manual (Page 187)

Setting Up the KONICA MINOLTA PS Driver (Windows) 6
IC-204 6-3
Per Page Setting Tab
Staple Specifies stapling.
Hole-Punch Specifies hole punching.
<Layout>
Normal
N-Up Specifies the number of pages printed on one page.
Booklet The print is made so that a booklet is formed as it is when folded into
two.
Fit A selection is made when the Original Size differs from the Output
Size with the Scaling displayed.
Scale Specifies the enlargement and reduction ratio.
Poster The print is made on two or more sheets of paper with images ex-
panded.
Log/Phys The print is made with no expansion/reduction made even when the
Original Size differs from the Output Size.
<Output>
Output Method Specifies output methods, such as “Secure Print” and “Save in User
Box”.
Output Tray Selects the tray where to output the printed pages.
Collate Specifies whether to print multiple copies in sets.
Offset When printing multiple copies, shifts the output position of each set.
User Authentication/
Account Track Specifies the user ID and password for “User Authentication” and
password and box name for “Secure Print” and “Save in User Box”.
Item Function
Front Cover Page Attaches a front cover page.
Back Cover Page Attaches a back cover page.
Chapter While in the double sided print mode/booklet print mode, the print
is made so that a designated page is sure to come to the front side
without fail.
Per Page Setting You can specify the page to change the print type and the paper
source.
Item Function