Konica Minolta bizhub 420 - Manual (Page 260)

Setting Up the PPD Driver (Mac OS X) 9
IC-204 9-3
ColorSync
*1
(This printing sys-
tem does not corre-
spond to this
function.)
Color Conversion Specifies the color conversion method.
Quartz Filter Specifies the color for printing.
Cover Page
*1
Print Cover Page Specifies whether to attach a cover page.
Cover Page Type Selects to print “Confidential” or other comments
on the cover page.
Error Handling PostScript Error Specifies whether to print an error report when a
PostScript error occurs.
Paper Feed All pages from Selects the input tray.
First page from Selects the input tray.
Remaining from Selects the input tray.
Finishing Collate Prints multiple copies in sets.
Offset Specifies offset.
Duplex Performs duplex printing.
Staple Performs stapling.
Hole-Punch Performs hole punching.
Binding Position Specifies the binding position.
Fold & Staple Executes the Fold & Staple.
Output Tray Selects the output tray.
Image/Layout Combination Specifies the booklet, 2 in 1 or 2Repeat.
Resolution Displays the resolution of the printer. (600dpi)
Smoothing Specifies smoothing in a document.
Print Density Set when adjusting the Print Density.
Setup Media Selects the paper type.
Front Cover Page Attaches a front cover page.
Paper Tray (Front
Cover Page) Selects the input tray for the front cover.
Back Cover Page Attaches a back cover page.
Paper Tray (Back
Cover Page) Selects the input tray for the back cover.
Transparency Inter-
leave Inserts interleaves between overhead projector
transparencies.
Paper Tray (Trans-
parency Interleave) Selects the input tray for the transparency inter-
leaves.
Menu Item Function