Konica Minolta bizhub 420 - Manual (Page 73)

Setting Up Network Printing 3
IC-204 3-2
Features of the Network Functions
This printing system is equipped with the following network functions to flex-
ibly support various network environments.
-
Automatic selection of 10Base-T or 100Base-TX (Fast Ethernet)
- Supports multiple network protocols including TCP/IP, NetBEUI, IPX/
SPX, AppleTalk (EtherTalk) and Bonjour/Rendezvous
- Supports SMB printing
SMB printing is a printing method that does not require a dedicated print
server.
- Supports Raw printing (except for Windows NT4.0)
- Supports LPD/LPR over TCP/IP from Windows NT 4.0/2000/XP/Server
2003/XP x64/Server 2003 x64
You can print with LPD/LPR. Windows 98SE and Windows Me cannot be
used.
– LPR (Line Printer Request): This print request system can be used under
Windows NT 4.0/2000/XP/Server 2003/XP x64/Server 2003 x64.
- Supports Novell NetWare Pserver and Rprinter (Nprinter)
- Supports the Novell NetWare print server functions and supports both
bindery mode and Novell Directory Service (NDS)
- Acquires IP address automatically through DHCP
With NetWare
The Novell NetWare 4.x–6 print server functions are supported.
You can connect this printing system to a network using Novell NetWare
4.x—6 as the network operating system and send print jobs from the client
to the print server (network controller). The three modes supported are as fol-
lows:
-
Nprinter
- Pserver
- NDPS
2
Note
For details on the NetWare functions, refer to the NetWare operation
manual.