Konica Minolta bizhub 420 - Manual (Page 270)

Setting Up the PPD Driver (Mac OS X) 9
IC-204 9-13
Finishing
You can specify these options when using the staple or hole punch finisher
functions of this machine.
1
From the “File” menu, select “Print”.
2
Select “Finishing”.
3
Specify settings for the following:
Collate Prints multiple copies in sets.
Offset Specifies offset.
Duplex Performs duplex printing.
Output Tray Selects the output tray.
Binding Position Specifies the binding position.
Staple Performs stapling.
Hole-Punch Performs hole punching.
Fold & Staple Executes the Fold & Staple.