Konica Minolta bizhub 420 - Manual (Page 98)

Setting Up Network Printing 3
IC-204 3-27
4
On the Network tab, click “AppleTalk Setting”.
5
Specify settings for the following:
AppleTalk: Set whether to use AppleTalk. Select “ON” here.
Printer Name: Specify the printer name (up to 31 alphanumeric charac-
ters).
Zone Name: Specify the zone being connected to (up to 31 alphanu-
meric characters).
6
To apply the settings, restart this machine (turn it off, then on again).
– When turning the power off, then on again, be sure to turn the sub-
power switch off first, then the main power switch. In addition, wait
at least 10 seconds before turning the power on again; otherwise,
this machine may not function properly.