Adjusting the printing position (image shift) -32 – Konica Minolta bizhub 420 User Manual
Page 216
Advertising
Setting Up the KONICA MINOLTA PS Driver (Windows)
6
IC-204
6-32
Adjusting the Printing Position (Image Shift)
Printing position on the output paper can be adjusted as follows.
1
Click the Special Functions tab.
2
Select the “Image Shift” check box.
3
Click [Settings].
4
Set the up/down/right/left shift of Front Side/Back Side and set the
shift of page interval in the unit of “0.1mm”.
2
Note
Select the “Back Side Auto Setup” check box. Then the back side can be
set in the same way as on the front side.
Advertising
This manual is related to the following products: