Konica Minolta bizhub 420 - Manual (Page 165)

Setting Up the PCL Driver 5
IC-204 5-33
5.7 Specifying the Quality Tab Settings
Pattern
Represents the image with black and white dots at varying density. Selecting
“Fine” increases the dot density. Default is “Coarse”.
1
Click the Quality tab.
2
Click the [Fine] in “Pattern”.
Print Density
By selecting the “Toner Save” or “Draft Print” check box, toner consumption
is saved or prints become lighter.
0 The “Toner Save” and “Draft Print” boxes in “Print Density” cannot be
used at the same time.
1
Click the Quality tab.
2
To save the toner consumption, select the “Toner Save” check box.
3
For lighter or draft printing, select the “Draft Print” check box.