Erasing images, Single-frame erase, All-frame erase – Olympus E-330 User Manual
Page 101: Single-frame erase all-frame erase
101
Pla
y
back
6
Erasing images
Lets you erase recorded images. You can select either single-frame erase,
which erases only the currently displayed image, or all-frame erase, which
erases all the images stored on the card.
Single-frame erase
1
Play back the image you want to erase.
2
Press the
S (erase) button.
3
Use
ac to select [YES], then press the
i button.
TIPS
To erase immediately:
J If you have set [QUICK ERASE] (P. 113) to ON,
pressing the
S button will erase an image
immediately.
All-frame erase
1
MENU[W][CARD SETUP]
2
Use
p to select [ALL ERASE]. Press the
i button.
x Notes
• Protected images cannot be erased. Cancel protected images, then erase
them.
• Once erased, images cannot be restored.
Preventing accidental erasure” (P. 100)
S button
s0003_e_advanced.book Page 101 Tuesday, December 27, 2005 1:36 AM