Olympus E-330 - Manual (Page 103)

103
Cu
stomizing th
e settings/functio
ns of
your
came
ra
7
7 Customizing the settings/functions of your camera
Normally, current camera settings (including any changes you have made) are
retained when the power is turned off. This camera allows you to restore the
factory default settings using [RESET] and register 2 different reset settings in
[RESET1] and [RESET2] for later use.
MENU[W][CUSTOM RESET SETTING]
[RESET]/[RESET1]/[RESET2]
• If settings have already been registered, [SET] is displayed next to the [RESET1]/
[RESET2] option.
Registering reset settings
1
Select either [RESET1]/[RESET2] to
register and press the
d button.
2
Select [SET] and press the i button.
• To cancel the registration, select [RESET].
Using reset settings
You can reset the camera to [RESET1] or [RESET2] setting or restore the
factory default settings.
[RESET] Resets to the factory default
settings.
[RESET1]/[RESET2]
Resets to the registered settings.
1
Select either [RESET]/[RESET1]/
[RESET2] and press the i button.
2
Use ac to select [YES], then press the
i button.
Custom reset setting
s0003_e_advanced.book Page 103 Tuesday, December 27, 2005 1:36 AM