Olympus E-330 - Manual (Page 57)

57
Flash shooting
V
ar
io
us shooting functions
3
Non-specified commercial flashes
1) Exposures when using a flash require that adjustments be made on the
flash. If a flash is used in the auto mode, match it with the f value and ISO
sensitivity settings on the camera.
2) Even if the flash auto f value and ISO sensitivity are set the same as on the
camera, the correct exposure may not be obtained depending on the
shooting conditions. In such a case, adjust the auto f value or ISO on the
flash or calculate the distance in the manual mode.
3) Use a flash with an illumination angle that matches the focal length of the
lens. The focal length of the lens for 35 mm film is approximately twice as
long as the focal length of the lenses designed for this camera.
4) Do not use a flash unit or other accessory TTL flash that has additional
communication functions other than the specified flashes, since it may not
only fail to function normally, but may also cause damage to the camera's
circuitry.
s0003_e_advanced.book Page 57 Tuesday, December 27, 2005 1:36 AM