Olympus E-330 - Manual (Page 96)

96
Pla
y
back
6
Playback on TV
Use the video cable provided with the camera to play back recorded images
on your TV.
1
Turn the camera and TV off,
and connect the video cable as
illustrated.
2
Turn on the TV and set it to the
video input mode. For details
on switching to the video input
mode, refer to the TV's manual.
3
Turn the camera on and press
the
q (playback) button.
x Notes
• To connect the camera to a TV, use the provided video cable.
• Make sure that the camera's video output signal type is the same as the TV's
video signal type. g“Selecting the video signal type before TV
connection” (P. 117)
• The camera's monitor turns off automatically when the video cable is
connected to the camera.
• The image may appear off-center depending on the TV screen.
Multi-connector
q button
Video cable
Video input terminal
s0003_e_advanced.book Page 96 Tuesday, December 27, 2005 1:36 AM