Olympus E-330 - Manual (Page 53)

53
Flash shooting
V
ar
io
us shooting functions
3
Flash bracketing
The camera shoots multiple frames, changing the amount of light emitted by
the flash for each shot.
MENU[X][FL BKT]
Use p to set.
[OFF]/[3F 0.3EV]/[3F 0.7EV]/[3F 1.0EV]
• You can change the EV step interval in the
custom menu.
g“EV step” (P. 108)
• When the shutter button is pressed, the
camera shoots 3 frames at a time in the
following order; Frame with optimum amount of
light emission, frame adjusted in
- direction
and frame adjusted in + direction.
External electronic flashes (optional)
In addition to the camera's built-in flash capabilities, you can use any of the
external flash units specified for use with this camera. This enables you to
take advantage of a wider variety of flash shooting techniques to suit different
shooting conditions.
The external flashes communicate with the camera, allowing you to control the
camera's flash modes with various available flash control modes, such as TTL
AUTO and Super FP flash. The flash can be mounted on the camera by
attaching it to the camera's hot shoe.
For details, refer to the external flash's manual.
Functions available with external flash units
Optional flash FL-50 FL-36 FL-20 RF-11 TF-22
Flash control
mode
TTL AUTO, AUTO, MANUAL,
FP TTL AUTO, FP MANUAL
TTL AUTO,
AUTO, MANUAL
TTL AUTO,
MANUAL
GN (Guide
number)
(ISO100)
GN50 (85 mm * )
GN28 (24 mm * )
GN36 (85 mm * )
GN26 (24 mm * )
GN20 (35 mm * ) GN11 GN22
* Calculated based on 35 mm film camera
x Notes
• The FL-40 optional flash cannot be used.
s0003_e_advanced.book Page 53 Tuesday, December 27, 2005 1:36 AM