Olympus E-330 - Manual (Page 89)

89
Pla
y
back
6
6 Playback
The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow step 1 below.
1
Press the
q (playback) button.
• The LCD monitor turns off after more
than 1 minute if no operations are
performed. The camera will turn off
automatically if there is no operation
after that. (Default setting is 4 hours.)
Turn on the camera again.
2
Use p to select images you want to view.
• To exit the playback mode, press the
q button.
• Pressing the shutter button halfway resumes the shooting mode.
Single-frame playback
q
q button The last recorded image appears.
a Displays the frame that is stored 10 frames back
c Displays the frame that is stored 10 frames ahead
d Displays the next frame b Displays the previous frame
s0003_e_advanced.book Page 89 Tuesday, December 27, 2005 1:36 AM