Olympus E-330 - Manual (Page 182)

182
Specifications
Informatio
n
11
„ Flash
Synchronization
: Synchronized with the camera at 1/180 sec. or less
Flash control mode : TTL-AUTO (TTL pre-flash mode), AUTO, MANUAL
External flash attachment : Hot shoe
„ External connector
USB connector/AV connector (Multi-connector)
„ Power supply
Battery
: BLM-1 Li-ion Battery x1
„ Dimensions/weight
Dimensions
: 140 mm (W) x 87 mm (H) x 72 mm (D)
(5.5" x 3.4" x 2.8") (excluding protrusions)
Weight : Approx. 550 g (1.2 Ib.) (without battery)
„ Operating environment
Temperature
: 0 - 40 m (32n - 104n) (operation)/
-20 - 60 m (-4n - 104n) (storage)
Humidity : 30 - 90 % (operation)/10 - 90 % (storage)
BLM-1 Li-ion battery
MODEL NO. : PS-BLM1
Product type : Rechargeable Lithium ion battery
Nominal voltage : DC 7.2 V
Nominal capacity : 1500 mAh
No. of charge and
discharge times
: Approx. 500 times (vary with usage conditions)
Ambient temperature : 0
m - 40 m (charging)
-10 m - 60 m (operation)
-20 m - 35 m (storage)
Dimensions : Approx. 39 mm (W) x 55 mm (D) x 21.5 mm (H)
Weight : Approx. 75 g (without protection cap)
BCM-2 Li-ion charger
MODEL NO. : PS-BCM2
Rated input : AC 100 V - 240 V (50/60 Hz)
Rated output : DC 8.35 V. 400 mA
Charging time : Approx. 300 mins. (approx. 5 hrs.)
(room temperature: if using BLM-1)
Ambient temperature : 0 - 40 m (32n - 104n) (operation)/
-20 - 60 m (-4n - 104n) (storage)
Dimensions : Approx. 62 mm (W) x 83 mm (D) x 26 mm (H)
Weight : Approx. 72 g (without AC cable)
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR
OBLIGATION ON THE PART OF THE MANUFACTURER.
Battery/charger specifications
s0003_e_advanced.book Page 182 Tuesday, December 27, 2005 1:36 AM