Single-frame shooting/sequential shooting, Setting single-frame/sequential shooting, P. 58 – Olympus E-330 User Manual
Page 58
58
V
ar
io
us shooting functions
3
Single-frame shooting/sequential shooting
Single-frame shooting o 1 frame at a time when the shutter button is
pressed (normal shooting mode).
Sequential shooting j
Shoots 4 frames or more at 3 frames/sec. (in SHQ,
HQ or SQ) for as long as the shutter button
pressed. Focus and exposure are locked at the
first frame. (during S-AF, MF)
Setting single-frame/sequential shooting
Press the j (drive) button and set using the
control dial.
o Single-frame shooting
j Sequential shooting
• Press the shutter button fully and keep it
pressed. The camera will take pictures in
sequence until you release the button.
• When settings are made with the j button,
the information is also displayed on the
viewfinder.
Control panel setting procedure
i
p:o (Drive mode) i
Menu setting procedure
MENU[X][j/</Y] Setting
x Notes
• Sequential shooting is not possible when [NOISE REDUCTION] (
is set to [ON].
• During sequential shooting, if the battery check blinks due to low battery, the
camera stops shooting and starts saving the pictures you have taken on the
card. The camera may not save all of the pictures depending on how much
battery power remains.
j button
: Single-frame shooting
:Sequential shooting
Viewfinder
s0003_e_advanced.book Page 58 Tuesday, December 27, 2005 1:36 AM