Olympus E-330 - Manual (Page 111)

111
Other function settings
Cu
stomizing th
e settings/functio
ns of
your
came
ra
7
j button function
This lets you replace the function assigned to the j button by registering
another function.
MENU[Y][jFUNCTION]
[j/</ Y]
It functions as the “Sequential shooting/Remote control/Self-timer” setting.
(factory-default setting)
g“Single-frame shooting/sequential shooting” (P. 58), “Self-timer
shooting” (P. 59), “Remote control shooting” (P. 61)
[
V]
One-touch white balance button
g“Setting the one-touch white balance” (P. 83)
[TEST PICTURE]
Pressing the shutter button while pressing the j button enables you to
check the picture you have just taken on the monitor without having to record
the picture to the card. This is useful when you want to see how a picture
turned out before saving it.
[MY MODE]
While holding down the j button, you can take pictures using the camera
settings registered in the [MY MODE SETUP].
g“My Mode setting” (P. 112) (See below)
[PREVIEW]/[PREVIEW B] (electronic)
While holding down the j button, you can use the preview function.
g“Preview function” (P. 38)
s0003_e_advanced.book Page 111 Tuesday, December 27, 2005 1:36 AM