Olympus E-330 - Manual (Page 85)

85
Expo
sur
e, imag
e and color
5
Picture mode
You can select image tone to create unique image effects. You can also fine-
adjust image parameters such as contrast and sharpness for each mode.
MENU[W][PICTURE MODE]
The adjustable parameters are classified
according to the condition of the picture.
• Contrast/Sharpness/Saturation
[
hVIVID]
: Produces vivid colors.
[ iNATURAL] : Produces natural colors.
[ jMUTED] : Produces flat tones.
• Contrast/Sharpness/B&W Filter/Pict. tone
[MONOTONE] : Produces black and white tone.
[SEPIA] : Produces sepia tone.
The individual parameters are as follows.
[CONTRAST] : Distinction between light and
dark
[SHARPNESS] : Sharpness of the image
[SATURATION] : Vividness of the color
[B&W FILTER] : Creates a black and white
image. The filter color is
brightened and the
complementary color is
darkened.
[N: NEUTRAL] : Creates a normal black and white image.
[Ye: YELLOW] : Reproduces clearly defined white cloud with natural
blue sky.
[Or: ORANGE] : Slightly emphasizes colors in blue skies and sunsets.
[R: RED] : Strongly emphasizes colors in blue skies and
brightness of crimson foliage.
[G: GREEN] : Strongly emphasizes colors in red lips and green
leaves.
[PICT. TONE] : Colors the black and white image.
[N: NEUTRAL] : Creates a normal black and white image.
[S: SEPIA] : Sepia
[B: BLUE] : Bluish
[P: PURPLE] : Purplish
[G: GREEN] : Greenish
The adjusted parameters are recorded in each picture effect mode. You can select
the picture effect modes on the control panel.
s0003_e_advanced.book Page 85 Tuesday, December 27, 2005 1:36 AM