Olympus E-330 User Manual

Page 31

Advertising

Advanced shooting modes

Select

ing the

right mode for

sh
ooting

conditions

Display in the viewfinder when the shutter button is pressed halfway

TIPS

The shutter speed indication does not stop blinking after the aperture
value is changed
J If the shutter speed indication is blinking when set to a high speed, set the ISO

sensitivity to a lower value or use a commercially available ND filter (for adjusting
the amount of light).

g“ISO k Setting the desired sensitivity to light” (P. 78)

J If the shutter speed indication is blinking when set to a lower speed, set the ISO

sensitivity to a higher value.

g“ISO k Setting the desired sensitivity to

light” (P. 78)

To change the EV step interval:
J In the menu, set the EV step interval to 1/3 EV, 1/2 EV or 1 EV.

g“EV

step” (P. 108)

To check the depth of field with the selected aperture value:
J Refer to “Preview function” (P. 38).

Overexposed when the shutter speed
indication is blinking. Increase the
aperture value (f-number).

Underexposed when the shutter speed
indication is blinking. Decrease the
aperture value (f-number).

Viewfinder

Shutter speed

Aperture value

confirmation

mark

Exposure mode