Olympus E-330 - Manual (Page 119)

119
Other function settings
Cu
stomizing th
e settings/functio
ns of
your
came
ra
7
Setting the date/time
Date and time information is recorded on the card together with the images.
The file name is also included with the date and time information. Be sure to
set the correct date and time before using the camera.
MENU[Z][X]
Use ac to select one of the following date
formats: [Y-M-D] (Year/Month/Day), [M-D-Y]
(Month/Day/Year), [D-M-Y] (Day/Month/Year).
Then press
d.
• The following steps show the procedure used
when the date and time settings are set to
[Y-M-D].
1
Use ac to set the year, then press d to
move to the month setting.
• To return to the previous setting, press
d.
• The first two digits of the [Y] (year) are fixed.
2
Repeat this procedure until the date and
time are completely set.
• The time is displayed in the 24-hour format.
For example, 2 p.m. will be displayed as
14:00.
3
Press the i button.
• For a more accurate setting, press i when the time signal hits 00 seconds.
The clock starts when you press the button.
x Notes
• The date and time settings will be returned to the factory default settings if the
camera is left without the battery for approximately 1 day. The settings will be
canceled more quickly if the battery was only loaded in the camera for a short
time before being removed. Before taking important pictures, check that the
date and time settings are correct.
s0003_e_advanced.book Page 119 Tuesday, December 27, 2005 1:36 AM