Olympus E-330 - Manual (Page 110)

110
Other function settings
Cu
stomizing th
e settings/functio
ns of
your
came
ra
7
Live view boost
It may be difficult to view images on the LCD monitor when the Live View
function is used in night scenes or dark places. Set to [ON] when you want the
subject to be displayed on the monitor.
MENU[Y][LIVE VIEW BOOST]
[ON]/[OFF]
• When the subject is displayed on the LCD monitor using this function, the
image quality drops below normal.
Customizing the control dial's function
The control dial factory default settings are as follows:
P Program shooting
Program shift (Ps) setting : Turning the control dial.
Exposure compensation setting : Turning the control dial while holding down
the F (exposure compensation) button.
M Manual shooting
Shutter speed setting : Turning the control dial.
Aperture value (f-number) setting : Turning the control dial while holding down
the F (exposure compensation) button.
You can invert the assignment of functions.
P Exposure compensation can be done by using only the control dial.
M The aperture can be set by using only the control dial.
MENU[Y][DIAL]
[P]/[M]
If you select [P]
[ %] Use the control dial to do program shift.
[F] Use the control dial to set the exposure compensation.
If you select [M]
[SHUTTER] Use the control dial to set the shutter speed.
[FNo.] Use the control dial to set the aperture value.
s0003_e_advanced.book Page 110 Tuesday, December 27, 2005 1:36 AM