Olympus E-330 - Manual (Page 122)

122
Print reservation (DPOF)
Pri
n
ting
8
Selecting the print reservation mode
Select whether to apply print reservation to selected pictures or apply print
reservation to all the pictures stored on the card.
[ <] Applies print reservation to selected
pictures.
[ U] Applies print reservation to all the
pictures stored in the card. Pictures
shot after performing all-frame
reservation and stored on the same card
will not be printed.
If print reservation data is already stored on the card
The RESET/KEEP selection screen appears, giving you the choice of
resetting the data or keeping it.
g“Resetting print reservation” (P. 123)
Selecting pictures you want to print
Applies print reservation to selected pictures.
Display the picture to be printed and select the
desired number of prints. The number of prints
can be set up to 10. If the number of prints is set
to 0, print reservation will not be applied.
If all-frame reservation is used after single-
frame reservation, specifications for the number
of prints will be overwritten and only one copy of
each frame will be printed.
s0003_e_advanced.book Page 122 Tuesday, December 27, 2005 1:36 AM