Olympus E-330 - Manual (Page 29)

29
Advanced shooting modes
Select
ing the
right mode for
sh
ooting
conditions
2
Aperture values and shutter speeds in the P mode
In the P mode, the camera is programmed such that the aperture value and
shutter speed are automatically selected according to the subject's brightness
as shown below. The program line diagram varies with the type of lens
mounted.
Program shift (
%
)
By turning the control dial in the P mode, you can change the combination of
aperture and shutter speed while maintaining the optimum exposure.
The program shift setting will not be canceled after shooting. To cancel
program shift setting, turn the control dial so that the viewfinder's or control
panel screen's exposure mode indication
% changes to P or turn off the
power. Program shift is not available when you are using a flash.
When using the ED
50 mm F2 MACRO
lens (Eg. when EV is
7, the aperture value
is set to F2 and the
shutter speed to
1/30.)
When using the
14 mm - 54 mm F2.8 -
3.5 zoom lens
(focal length: 54 mm)
When using the
14 mm - 54 mm F2.8 -
3.5 zoom lens
(focal length: 14 mm)
Viewfinder
Shutter speed Aperture value
AF confirmation mark
Control panel screen display
%
indication
Exposure mode
s0003_e_advanced.book Page 29 Tuesday, December 27, 2005 1:36 AM