Olympus E-330 - Manual (Page 116)

116
Other function settings
Cu
stomizing th
e settings/functio
ns of
your
came
ra
7
Sleep timer
After a specified period of time elapses with no operations being performed,
the camera enters the sleep mode (stand-by) to save battery power. [SLEEP]
lets you select sleep timer. [OFF] cancels the sleep mode.
The camera activates again as soon as you touch any button (the shutter
button, arrow pad, etc.).
MENU[Z][SLEEP]
[OFF]/[1MIN]/[3MIN]/[5MIN]/[10MIN]
USB mode
You can connect the camera directly to a computer or printer with the provided
USB cable. If you specify the device you are connecting to beforehand, you
can skip the USB connection setting procedure normally required every time
you connect the cable to the camera. For details on how to connect the
camera to either device, refer to Chapter 9 “Connecting the camera to a
printer” (
g P. 126) and Chapter 10 “Connecting the camera to a
computer” ( g P. 136).
MENU[Z][USB MODE]
[AUTO]
The selection screen for the USB connection will be displayed every time
you connect the cable to a computer or printer.
[STORAGE]
Allows USB connection to a PC and transfer of data to the PC. Also, select
to use the OLYMPUS master software via PC connection.
[CONTROL]
Allows you to control the camera from a PC using the optional OLYMPUS
Studio.
[
<EASY]
Can be set when connecting the camera to a PictBridge-compatible printer.
Pictures can be printed directly without using a PC.
g“Connecting the camera to a printer” (P. 126)
[
<CUSTOM]
Can be set when connecting the camera to a PictBridge-compatible printer.
You can print out pictures with set number of prints, print paper and other
settings.
g“Connecting the camera to a printer” (P. 126)
s0003_e_advanced.book Page 116 Tuesday, December 27, 2005 1:36 AM