Olympus E-330 - Manual (Page 117)

117
Other function settings
Cu
stomizing th
e settings/functio
ns of
your
came
ra
7
Changing the display language
You can change the language used for the on-screen display and error
messages from ENGLISH to another language.
MENU[Z][W]
Use
ac to select the language you want to use.
• You can add another language to your camera with the provided OLYMPUS
Master software.
For details, refer to Help in OLYMPUS Master software.
Selecting the video signal type before TV connection
This lets you select NTSC or PAL according to your TV's video signal type.
You will need to set this when you want to connect the camera to a TV and
play back images in a foreign country. Make sure the correct video signal type
is selected before connecting the video cable. If you use the wrong video
signal type, recorded pictures will not play back properly on your TV.
MENU[Z][VIDEO OUT]
[NTSC]/[PAL]
TV video signal types in major countries and regions
Check the video signal type before connecting the camera to your TV.
Button timer
When functions are set with the direct buttons, this function allows you to set
the duration from when you stop operating the buttons to when the menu
disappears.
MENU[Z][BUTTON TIMER]
[HOLD] You can take as long as you like to complete function setting. The
current screen will remain until you press the button again.
[3SEC] You will have 3 seconds to complete function setting on the
current setting screen.
[5SEC] You will have 5 seconds to complete function setting on the
current setting screen.
[8SEC] You will have 8 seconds to complete function setting on the
current setting screen.
NTSC North America, Japan, Taiwan, Korea
PAL European countries, China
s0003_e_advanced.book Page 117 Tuesday, December 27, 2005 1:36 AM