Controls and input connections, Switching on, Using the tv controls and connections – Toshiba L6463 User Manual
Page 14: Switching on using the tv controls and connections
CONNECTING YOUR TV
Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side of the
While all the necessary adjustments and controls for the television are made using the remote
control, the buttons on the television may be used for some functions.
If the RED LED is not lit, check that the mains plug is
connected to the power supply and press
on the remote
control; it may take a few moments. The GREEN LED will
To put the television into Standby, press
on the remote
control. To view the television, press
again. The picture
may take a few seconds to appear.
• To turn on or off the TV, press
• To alter the volume, press + or –.
+ and – buttons operate as volume up/down as default.
repeatedly to switch the function of
– button as below.
The My Contents feature provides access to photo, movie
and music files stored on a USB storage device that is
connected via the USB 1 or USB 2 port or on a network
Please always refer to the owner’s manual of the
equipment to be connected for full details.
• The USB socket has limited functionality and Toshiba
can take no responsibility for damage to other
• Interactive video games that involve shooting a “gun” at
an on-screen target may not work with this TV.
The Common Interface is for a
Conditional Access Module (CAM).
Contact a service provider.
The software updating of CI Plus CAM
may be automatically executed. At this
time, your Recording/Reminder
programming will be cancelled.
On = Green
Standby = Red
ILLUSTRATION SHOWS 32L.
DVB COMMON INTERFACE
My Contents/USB HDD
For energy saving:
We recommend that you use the television with the
factory settings. The factory settings are for energy
Unplugging the mains plug will cut energy use to zero for
all televisions. This is recommended when the television
is not being used for a long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy
Energy efficiency cuts energy consumption and can
NOTE: Putting the television into Standby will reduce
energy consumption, but will still draw some power.
Using the TV controls and