Device name setup, Usb hdd record function – Toshiba L6463 User Manual
Page 50
50
En
g
lis
h
CONTROLS AND FEATURES
The TV’s device name can be changed.
a
In the Network menu, press
B
/
b
to select
Network Device Setup and press OK.
b
Press
B
/
b
to select Device Name Setup and
press OK.
The Device Name Setup screen will appear.
c
Press
B
/
b
to select Device Name and press
OK. The Software Keyboard window will appear.
d
Input the Device Name by using the software
keyboard (see page 48). To save your setting,
press the GREEN button.
NOTE:
• The Device Name can be up to 15 characters
long.
• Only the 0-9, - and A-Z (uppercase only)
characters may be used for the device name.
e
Press
b
to highlight Done and press OK to save
your setting.
USB HDD Record Function
This function can be used to record and play
digital broadcast programmes (function is
dependant on country selection). Read the
precautions below before recording or viewing
programmes using the USB HDD record
function.
NOTE:
• In order to use this function, a USB HDD needs to be
connected to the TV. Do not use USB Hub.
• After recording operation, time may take to a recording
start.
• Recorded programmes saved on the USB HDD can only
be viewed on this TV. They cannot be viewed when
connected to another TV (including the same model of
TV), a PC, or other device.
• You cannot watch other channel while recording one
channel.
• If the recording time to the USB HDD is too short, no
data may be saved.
• You cannot record video input signals on the USB HDD.
• Not all types of broadcast may be recordable.
• After programming the TV to record digital broadcasting,
do not disconnect the power plug before recording
starts.
• If there is a power failure or the power plug is
disconnected after programmed recording, recording
does not start unless the power returns and you press
the
1
button to set On the TV.
• Should video or audio recording fail due to malfunction
of the TV or poor reception, no compensation would be
paid.
• If there is a power failure or the power plug is
disconnected during programmed recording, recording
will stop and will not resume when the power returns or
the plug is reconnected.
• Do not disconnect the power plug when the indicator
LED is lit.
• Any changes implemented by the broadcasting station
may affect programme scheduling.
• Start delay may occur while the plural continuous
programmed recording.
• Accurate start / finish time for recording is reliant on
broadcasters maintaining correct time stamp if this not
the case the recording will fail.
• Some broadcasters can control whether a programme
can be recorded or how long you may be able to view it
for after recording. The on screen message “Retention
limit expired” means that the time limit for viewing the
program has lapsed.
• Programmed recording cannot take place if the power
plug is not connected.
• Disconnecting the power plug during recording may
result in failure to save the recorded programme.
• USB HDD recording feature is not available in all
countries.
Device Name Setup