Text services, Selecting modes, Text information – Toshiba L6463 User Manual
Page 83: Selecting modes text information
This television has a multi-page text memory,
which takes a few moments to load. It offers two
Modes of viewing text – Auto will display
Fastext, if available. List will save your four
The text character set will be automatically chosen by the
language setting in the Options menu.
to highlight Options icon.
to select Teletext, and then
to select Auto or List.
The TEXT button
To view text services press TEXT. Press again to
superimpose the text over a normal broadcast picture and
again to return to normal viewing. Channels cannot be
changed until text is cancelled.
The first text page shown will be the initial page.
Any text page can be accessed by entering the 3-digit
page number using the numbered buttons, pressing the
coloured buttons or pressing P
to advance to the next
page and P
to go back to the previous page.
The pages on the screen will dynamically update as sub-
pages are received.
If you open a page containing sub-pages, the sub-pages
are automatically displayed in sequence. To quit
automatic sub-page change, press
Once selected, the sub-page you are viewing will be
highlighted and, as the television loads any additional sub-
pages, the colour of the numbers will change, indicating
that these pages have been loaded.
These sub-pages will remain available to view until
another page is chosen or, in normal TV mode, the
channel is changed.
If Fastext is available, four coloured titles will appear at
the base of the screen.
To access one of the four given subjects, press the
relevant coloured button on the remote control.
For further information on your particular text system(s),
see the broadcast text index page or consult your local
The four coloured choices at the bottom of the screen are
numbers – 100, 101, 102 and 103, which have been
programmed into the television’s memory. To view these
pages, press the relevant coloured buttons.
To change these saved pages, press the relevant
coloured button and enter the 3-digit number. This number
will change in the top left of the screen and in the coloured
Press OK to save. Whenever OK is pressed, all four
page numbers showing at the bottom will be saved
and the previous ones will be lost.
NOTE: The video signal from the external inputs (EXT-1
and EXT-2) is not saved.
If OK is not pressed, the selection will be forgotten when
the channel is changed.
Other pages may be viewed by entering the 3-digit page
number – but DO NOT press OK or these pages will be
My Contents Setup
HDMI CEC Control Setup
Hybrid TV Standard
HDMI Information Display
Navigating pages using Auto
Navigating pages using LIST