Toshiba L6463 - Manual (Page 39)

39
Engl
ish
CONTROLS AND FEATURES
This feature is available when the Picture Mode option is
Standard, Hollywood Day, Hollywood Night, and
Hollywood Pro.
Test Pattern
When the test pattern is on screen, you can navigate in the
Picture submenus and adjust picture settings without
removing the image.
When you move to a non-Picture menu, or close the
menus, regular video will be restored.
a
In the Picture menu, press B / b to select Expert
Picture Settings and press OK.
b
Press B / b to select Test Pattern and press OK.
c
Press B / b to select On and press OK.
RGB Filter
This feature individually enables or disables the red,
green, and blue components of the picture to allow for
more accurate adjustment of each colour.
a
In the Expert Picture Settings menu, press B / b
to select RGB Filter and press OK.
b
Press B / b to select Red, Green or Blue to
adjust and press OK.
c
Press B / b to select On and press OK.
d
Press B / b to select Colour or Tint and press C /
c to adjust.
e
Press OK.
NOTE: It is not possible to turn off all three colours
simultaneously.
Colour Decoding
If you view DVDs with this TV, the Colour Decoding option
may be set to ensure the colourimetry reproduction.
NOTE: The modes excluding Auto (BT.709 and BT.601)
are to convert an irregular signal output from the DVD etc.
with incorrect colour to the optimum state. If BT.709 or
BT.601 is selected with a normal signal received, the
colour may not be correctly displayed. This feature should
normally be set to Auto.
a
In the Expert Picture Settings menu, press B / b
to select Colour Decoding and press OK.
b
Press B / b to select Auto, BT.709 or BT.601 and
press OK.
White Balance-Window Display
This feature displays a special Window Pattern to be used
when adjusting white balance with a measuring device.
a
In the Expert Picture Settings menu, press B / b
to select White Balance and press OK.
b
Press B / b to select Window Display and press
c and B / b to select On and press OK.
White Balance-Setting Type
You can choose from two types of White Balance
adjustment.
a
In the Expert Picture Settings menu, press B / b
to select White Balance and press OK.
b
Press B / b to select Setting Type and press OK.
c
Press B / b to select 2P or 10P and press OK.
Expert Picture Settings