Using hdmi cec control, Enable hdmi cec control, Tv auto power – Toshiba L6463 User Manual
Page 80: Enable hdmi cec control tv auto power
80
En
g
lis
h
CONTROLS AND FEATURES
NOTE:
• This feature is greyed out when Audio Delay is
in Auto.
• A time lag will occur when the video signal or
audio signal is changed. Adjust the timing
accordingly.
• When adjusting the timing, turn down the volume
of the AV equipment used as far as possible.
Depending on the equipment, noise etc. may
occur when the signal is changed.
• Depending on the connected equipment
(amplifier, etc.), adjustment may not be possible.
• When the optical digital output setting
(Auto
t
PCM) is changed, it may be necessary
to adjust the timing again.
• Do not use other than for audio output from the
AV amplifier, etc. (Malfunction may occur)
Using HDMI CEC Control
This is a new feature that uses CEC technology
and allows you to control Toshiba HDMI CEC
Control compatible devices from the television
remote control via HDMI connection (page 10).
When the Enable HDMI CEC Control item in the HDMI
CEC Control Setup menu is set to On, individual
functions also set to On will be activated.
a
Press
and
B
/
b
to highlight Options icon.
b
Press
c
and
B
/
b
to select HDMI CEC Control
Setup and press OK.
c
Press
B
/
b
to select Enable HDMI CEC Control
and press OK.
Press
B
/
b
and OK to select On.
NOTE: If you set Enable HDMI CEC Control to
Off, all other items will be greyed out.
The TV Auto Power setting allows the television to be
automatically switched on if an HDMI CEC Control device
is turned on.
a
In the HDMI CEC Control Setup menu, press
b
to highlight TV Auto Power.
b
Press
c
and
B
/
b
to select On or Off.
Enable HDMI CEC Control
TV Auto Power
Enable HDMI CEC Control
On
TV Auto Power
On
Auto Standby
On
Amplifier Control
On
Initial Speaker Setting
TV Speakers
< HDMI CEC Control Setup
On
Off