Toshiba L6463 - Manual (Page 75)

75
Engl
ish
CONTROLS AND FEATURES
Digital settings – other settings
In DTV mode, this feature will show subtitles on the screen
in the selected language provided they are being
broadcast.
a
In the DTV Settings menu, press B / b to select
Subtitle and Audio and press OK.
b
Press B / b to select Subtitle Display and press
c and B / b to select On or Off.
c
Press B / b to select Primary Subtitle Language
or Secondary Subtitle Language and press c
and B / b to select an option.
The SUBTITLE button can be used to select subtitle on or
off for the current channel only and to select the subtitle
language if more than one subtitle is available.
a
In the DTV Settings menu, press B / b to select
DVB Character Set and press OK.
b
Press c and B / b to select Standard, Latin
alphabet 2, West or Latin alphabet 9.
This feature allows a programme or film to be viewed with
a choice of soundtrack language, provided multiple
language tracks are being broadcast.
a
In the Subtitle and Audio menu, press B / b to
select Audio Type and press c and B / b to
select Normal, For Hard of Hearing or Audio
Description and press OK.
b
Press B / b to select Primary Audio Language
or Secondary Audio Language and press c and
B / b to select an option.
If more than one soundtrack is available, use the
s button to select between them.
The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional
Access Module) and card. These are purchased from a
service provider and allow additional subscription
broadcasts to be viewed. For information, see a service
provider.
a
Insert the CAM and card into the Common
Interface Slot, following the instructions provided
with the CAM. A box will appear on screen to
confirm that the CAM has been inserted.
b
Press and B / b to highlight Installation
icon.
c
Press c and B / b to select DTV Settings and
press OK.
d
Press B / b to select Common Interface and
press OK.
e
Details of the CAM should now be available.
NOTE:
• Software update of a CI Plus CAM may execute
automatically if it is instigated by the broadcaster. This
could cause the cancellation of any Reminders/
Recordings during this process.
• Some CI or CI+ CAM may not be supported.
Stored the CICAM PIN is used for recording.
a
Press and B / b to highlight Installation
icon.
b
Press c and B / b to select DTV Settings and
press OK.
c
Press B / b to select Stored CICAM PIN and
press OK.
d
Input PIN code on the Stored CICAM PIN dialog
window and press Done.
NOTE: Note relating to cards for which the CAM PIN can
be changed through the Common Interface: If you change
the PIN through the Common Interface after setting the
stored PIN, it invalidates the stored PIN, which you must
change in a separate operation.
Subtitles
DVB Character Set
Audio languages
Subtitle Display Off
Subtitle Type Normal
Primary Subtitle Language English
Secondary Subtitle Language English
Audio Type Normal
Primary Audio Language English
Secondary Audio Language English
< Subtitle and Audio
Common Interface
Stored CICAM PIN