Toshiba L6463 - Manual (Page 20)

20
En
g
lis
h
SETTING UP YOUR TV
LNB allows you to determine the lower and higher
Local Oscillator Frequency (LOF). Usually, the
factory settings do not need to be changed. You
can find the parameters of the lower and higher
LOF on the specification sheet of your LNB.
Press B / b to highlight Done and press OK.
x
If your satellite dish is moveable, the following
Positioning screen will appear.
Press B / b to highlight Positioning, and then
press C / c to find the dish position with the
strongest signal level.
Press B / b to highlight Store Position and press
OK to store the dish position. Repeat steps 23 and
24 for the next satellite as necessary.
Adjust the dish position manually for the maximum
Signal Level strength. The signal level strength is
displayed from 0 % to 100 %. A high signal level
can be achieved by adjusting the satellite dish the
best way possible.
Press B / b to highlight Done and press OK.
If your satellite dish is not movable, please adjust
the dish manually and press Done.
If you select Single Cable in step 23, the Single
Cable Settings screen will appear. You can set
the appropriate value for each item and highlight
Done.
y
If the reception testing completes successfully, the
Auto Tuning startup screen will display.
You can select Search Option from Free to Air or
All.
When choosing the search option All, all channels
(including encrypted ones) of the satellite will be
searched for. If you wish to only search for
unencrypted (free) channels, please select Free to
Air. In this case, the channel scan will be
completed faster.
z
Press b to highlight Start Scan, and press OK.
The television will start to search for available
DVB-S channels. The progress bar will indicate
the scan status.
When the search is complete, the Auto Tuning
results screen will display the total number of
services found.
Use B / b to move through the list to select a
channel, and then press OK to view.
1 Astra 19.2E 1 1
2
3
4
Satellite Settings
Switch Type
LNB Power None
On
No. Satellite Dish LNB
Done
Transponder : 1/120 (10729) MHz
Dish Type : Fixed
Lower LOF : 9750
Upper LOF : 10600
Transponder
Go to 0
Go to Stored Position
Step Size
Positioning
Positioning
Satellite : ASTRA 19.2°E
Signal Level
0%
Store Position
1/3(5MHz H(R))
1
W E
Satellite : ASTRA 23.5°E
Quality GOOD
Signal Level 30%
PLEASE NOTE
The Quick Setup menu can also be accessed at
any time from the Installation menu.
User Slot Number 0
User Slot Frequency 1284
Password PIN None
Single Cable Settings
Done
Verify Slot Frequency
Scan Type Quick Scan
Search Option Free to Air
Auto Tuning - Satellite
Start Scan