The time display – analogue only, Stereo and bilingual transmissions, Sound controls – Toshiba L6463 User Manual
Page 31: Volume controls and sound mute, Sound navi, Sound mode, Graphic equaliser, Trudialog
31
Engl
ish
CONTROLS AND FEATURES
The time display facility allows the current (text service)
time to be seen on the television screen.
Press
D
whilst watching a normal television
broadcast to see the time display from the broadcaster. It
will remain on screen for about 5 seconds.
NOTE: This display may not be available in some cases.
For DTV programmes
For stereo or dual mono broadcasts, press
s
and use
C
/
c
to select settings.
For multi-audio track broadcasts, press
s
repeatedly to
change the audio language (see “Audio languages” on page
75).
For ATV programmes
If stereo or dual language broadcasts are transmitted, the
word Stereo or Dual will appear on the screen each time
channels are changed, disappearing after a few seconds.
If the broadcast is not in stereo, the word Mono will
appear.
Stereo… Press
s
to select Stereo or Mono.
Bilingual… Bilingual transmissions are rare. If they are
transmitted, the word Dual will be displayed. Choose the
required programme number, and if the word Dual
appears, press
s
to select Dual 1, Dual 2 or Mono.
Sound controls
Volume
Press
2
+ or
2
– to adjust the volume.
Sound Mute
Press
once to turn the sound off and again to cancel.
To set the frequency characteristics in the equaliser
function corresponding to the environment.
a
Press
and
B
/
b
to highlight Sound icon.
b
Press
c
and
B
/
b
to select Sound Navi to select
Stand or Wall.
This feature adjusts the Advanced Sound Setting
depend on the content.
a
In the Sound menu, press
B
/
b
to select Sound
Mode and press
c
and
B
/
b
to select Standard,
Music, Movie, Clear Voice or Sound Separation
and press OK.
This feature adjusts the frequency of output. This feature
is effective only the selection of Standard in Sound
Mode.
a
In the Advanced Sound Settings menu, press
B
/
b
to select Graphic Equaliser and press OK.
Graphic Equaliser screen will be displayed. Press
C
/
c
to select frequency and press
B
/
b
to
select level. To close the window, press EXIT.
Dialog enhancement for clear and intelligible vocals.
a
In the Advanced Sound Settings menu, press
B
/
b
to select TruDialog and press
c
and
B
/
b
to select On or Off.
The Time Display – analogue only
Stereo and Bilingual transmissions
Mode Display
Pressing
c
Stereo
Stereo
S
Left
S
Right
Dual mono
Dual 1
S
Dual 2
Mono
–
Multichannel
–
Volume controls and sound mute
Sound Navi
Sound Mode
Graphic Equaliser
TruDialog™