Sharp MX-2614N User Manual

Page 225

Advertising
background image

2-113

COPIER

Contents

COPYING IN THE CENTRE OF THE PAPER (Centring)

This is used to centre the copied image on the paper.
This lets you place the image in the centre of the paper when the original size is smaller than the paper size or when the
image is reduced.

Not using the centring function

Using the centring function

1

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

2

Select the special modes.

(1) Touch the [Special Modes] key.

(2) Touch the

keys to switch through the screens.

(3) Touch the [Image Edit] key.

[Image Edit] KEY

(page 2-104)

3

Select Centring.

(1) Touch the [Centring] key so that it is

highlighted.

(2) Touch the [OK] key.

You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.

4

Press the [COLOUR START] key or the [BLACK & WHITE START] key.

Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then
touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first
original.

To cancel scanning and copying...
Press the [STOP] key (

).

OK

Mirror

Image

B/W

Reverse

Multi-Page

Enlargement

Centring

Photo Repeat

Special Modes

Image Edit

A3

Full Bleed

OK

(1)

(2)

Advertising
This manual is related to the following products: