Sharp MX-2614N User Manual

Page 567

Advertising
background image

5-84

SCANNER/INTERNET FAX

Contents

4

Specify the original size.

(1) Enter the original size.

• Touch the X (width) numeric value display key and

enter the width.

• Touch the Y (height) numeric value display key and

enter the height.

(A) To return the original size to the default size, touch the

[Size Reset] key.

(B) To automatically enlarge or reduce the image to fit the

send size, touch the [Fit to Send Size] key. If you wish
to scan the original at the entered original size, there
is no need to touch this key.

(2) Touch the [OK] key.

• You can also touch the

keys to change the number.

• The send size will be selected automatically based on the entered original size.

• After selecting Card Shot, you can touch the [Original] key in the base screen to change the original scan size or the

send size. In this case, the screen of this step appears when you touch the scan size key. For the procedure for
setting the send size, see "

Specifying the send size of the image

" (page 5-59).

5

Press the [COLOUR START] key or the [BLACK & WHITE START] key to scan the
front side of the card.

If the destination is an Internet fax destination, press the [BLACK & WHITE START] key.

To cancel scanning...
Press the [STOP] key (

) to cancel the operation.

6

Turn the card over and press the [COLOUR START] key or the [BLACK & WHITE
START] key to scan the reverse side of the card.

Press the same [START] key that was used to scan the front side.

Before scanning the back of the card, you can touch the [Configure] key in the touch panel to change the exposure.

To cancel scanning...
Press the [STOP] key (

) to cancel the operation.

Scan/Special Modes

OK

X

Y

Card Shot

OK

Cancel

Fit to

Send Size

Size Reset

(25~210)
mm

(25~210)
mm

86

54

(2)

(B)

(1)

(A)

X

Y

Advertising
This manual is related to the following products: