Sharp MX-2614N - Manual (Page 96)

1-55
BEFORE USING THE MACHINE
Contents
4
Remove the charger cleaner
The charger cleaner is attached to the front cover of the
machine.
(1) Unfasten it from the claw by pressing the
right side of the charger cleaner.
(2) Place it in the front spread across the top of
the claw.
(3) Unfasten the charger cleaner rotating
around the boss from the claw on the left
side.
5
Clean the main charger.
(1) Gently push the charger cleaner all the way
in.
(2) Gently pull the charger cleaner out.
Insert so that the cleaning location label (A) and the charger
cleaner label (B) are oriented as shown.
6
Repeat step 4 with each of the other
main chargers.
There are a total of 4 places to be cleaned in the machine as
shown.
(2)
(1)
(3) Boss
(B) (B)
(A)
Main charger