Replace the, Staple cartridge, Finisher maintenance -45 – Sharp MX-2614N User Manual

Page 86: Finisher maintenance

Advertising
background image

1-45

BEFORE USING THE MACHINE

Contents

FINISHER MAINTENANCE

When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the procedure below
to replace the staple cartridge.

Replacing the staple cartridge

1

Open the cover.

2

While pressing the lever over to the left,
slide the finisher to the left until it stops.

Gently slide the finisher until it stops.

3

Lower the staple case release lever and
remove the staple case.

Pull the staple case out to the right.

4

Remove the empty staple cartridge from
the staple case.

5

Insert a new staple cartridge into the
staple case as shown.

Push the staple cartridge in until it clicks into place.

Advertising
This manual is related to the following products: