Sharp MX-2614N - Manual (Page 51)

1-10
BEFORE USING THE MACHINE
Contents
TOUCH PANEL
This section explains how to use the touch panel.
Messages and keys are displayed in the touch panel display to enable various operations to be performed.
The [JOB STATUS] (
), [HOME] ( ), and [SYSTEM SETTINGS] ( ) keys are also available on the touch panel.
• To enter text, see " ENTERING TEXT " (page 1-70).
• Touch the [JOB STATUS] key ( ) to display the job status screen. For details, see the chapters for each of the
function in this manual.
• For details about the [HOME] key ( ), see " HOME SCREEN " (page 1-22).
• Touch the [SYSTEM SETTINGS] key ( ) to display the system settings menu screen. For information on the
screens and procedures for using the system settings, see " Common Operation Methods " (page 7-4) in "7. SYSTEM
SETTINGS".
Using the touch panel display
Example 1
(1) Mode select keys
Use these keys to switch between copy, image send, and document filing modes*.
* On the MX-2314N, the productivity kit is required. If the productivity kit is not installed, the mode used will be print
mode.
(2) Settings for each function are easily selected and cancelled by touching the keys on the screen with your finger.
When an item is selected, a beep will sound and the item will be highlighted to confirm the selection.
(3) Keys that are greyed out cannot be selected.
When you operate the touch panel, do not accidentally touch areas in the touch panel that are not necessary for the intended
operations.
If touched, the machine may malfunction.
If you touch a key that cannot be selected, a double beep will sound.
[JOB STATUS] key ( )
[HOME] key ( )
[SYSTEM SETTINGS] key ( )
Display
Job status screen.
Detail
Spool
Complete
Stop/Delete
Copy 2
3
4
002 / 000 Waiting
Computer01 002 / 000 Waiting
0312345678 001 / 000 Waiting
Print Job
Job Queue Sets / Progress Status
Scan to Fax Job
Priority
1
1
Job Queue Copy 1 020 / 001 Copying
IMAGE SEND
DOCUMENT
FILING
COPY
(3)
(2)
Beep
Tone
(1)