Sharp MX-2614N User Manual

Page 748

Advertising
background image

7-80

SYSTEM SETTINGS

Contents

Auto Colour Calibration

This is used to perform automatic colour correction when the colour in colour printing is off. The machine prints a test
patch, the test patch is scanned, and the colour is automatically corrected.

After the [Execute] key is touched and a test patch is printed, a message appears prompting you to begin automatic
calibration. Place the test patch on the document glass as shown below (so that the thin line at the edge of the page is to
the left).

Lay copy paper (about five sheets) that is the same size as the test patch on top of the placed test patch, gently close
the automatic document feeder, and touch the [Execute] key.

• Before executing Auto Colour Calibration, check to see if the registration adjustment is correct. If the registration

adjustment is not correct, perform "

Registration Adjustment

" (page 7-68).

• If the colour is still off after performing Auto Colour Calibration, repeating Auto Colour Calibration once again may improve

the colour.

Thin line

Advertising
This manual is related to the following products: